Introduction

 

 

 

HOUR METERS

  • Records & Displays to 9,999.9 Hrs.¬†Resoltion: 0.1 Hour
    OR
  • Records & Displays to 99,999 Hrs. Resolution: 0.1 Hour
  • Hour Glass symbol flashes to indicate counting time.
  • Automatic Roll over
  • Input Choices:

    DC: 8-32 VDC (polarized)
    AC/DC: 5-80 VAC/VDC (Non polarized), 50/60 Hz
    AC/DC: 24-277 VAC/VDC (Non polarized), 50/60 Hz
    Inductive-off spark plug wire
    Rotating Shaft-uses very small magnet on shaft w/Pickup
    Vibration: three levels of sensativity, activate by
    cutting wire loop on back of meter prior to installation.
    Alternator Triggered
    Contact Closure

  • Quartz Accuracy: +/- .02% (over entire voltage and temperature range) indicate counting time.
  • HOUR METER OEM Options:

    Flash Alert programmin – informs user
    “What to Service & When”
    Input reset – user toggls input for reset
    Custom Pad Printing
    Custom Bezels
    Terminations: Wire, stud, screw or spade

TACHOMETER

  • Firing Pattern: 1 spark to 1 RPM or 2 sparks to 1 RPM (other patterns available)
  • Resolution: 10 RPMs
  • Maximum RPM’s: 8,000 (SFT 806 Models: 6000RPM)
  • Automatic Rollover

    Suitable for all single & twin cylinder, four cycle
    gasoline engines operated within specified firing
    input – call factory for details.

VOLT METER

  • Available in 12, 24, 36 & 48 volt DC ranges
  • 10 segment Bar Graph Display
  • Resolution: 1 volt per bar
  • Accuracy: +/- 0.30 volts DC
  • Current Draw: 20mA
  • Reverse Polarity Protected
  • LED Flash Alert: OEM specifies High/Low voltages,
  • LED Bar flashes when critical level is reached.
  • VOLT METER OEM Options:

    Lock out disabling application when battery is dangerously low.
    Other voltages available

Specifications subject to change without notice. CAUTION: Only qualified personnel should make working on electrical circuits. Failure to follow normal electrical guidelines may result in dmage to equipment and/or serious bodily injury.

BATTERY FUEL GAUGE

  • Available in 12, 24, 36 & 48 volt DC ranges
  • 10 segment Bar Graph Display
  • Resolution: 10% per LED Bar (segment)
  • LED enable input to save battery current
  • Current Draw: 5mA (LED display off), 20mA (LED display on)
  • Reverse Polarity Protected
  • 70% discharge indicated by 2nd to the left LED Bar flashing
  • 80% discharge indicated by the TWO (2) left LED Bar flashing
  • Overcharge protected: 50% over nominal voltage
  • Full charge indicated when top LED bar is lit.

    (specified full charge voltage per cell is reached for minimum of 6 minutes continously) 0.187 spades

  • BATTERY FUEL GAUGE OEM Options:

    Lock out disabling application when battery is dangerously low.
    Other voltages available
    Custom discharge curves

LIQUID FUEL GAUGE

  • For use with Fuel Senders (30-240 ohms), (0-90 OHMS) and other OEM specified Fuel Senders.
  • Available in 12, 24, 36 and 48 volt DC ranges
  • 10 segment LED Bar Graph display
  • Resolution: 10% per LED segment (or OEM specified)
  • Current Draw: 20mA with LED Display ON Reverse Polarity protected
  • 70% liquid discharge indicated by the 2nd to the left LED Bar flashing
  • 80% liquid discharge indicated by the TWO left LED Bars flashing
  • Full Tank indicated when the top LED bar is lit
  • LIQUID FUEL GAUGE OEM Options:

    Custom fuel level curves
    Custom fuel sender interfaces
    Available in other DC operating ranges
    Generic signal or LED drive Outputs

GENERAL SPECIFICATIONS FOR ALL PRODUCTS IN THE GUIDE

  • operating temperature: -40F to 160F, -4C to 71C
  • Shock: SAE J1378 55g’s
  • Vibration: SAE J1378 20g’s
  • Humidity: SAE J178 95% humidity
  • Warranty: 2 years from date of purchase
  • Case Material: ABS – black, also available in white
  • Waterproof to 70′ below surface
  • UL & CUL recognized, CE approved
  • GENERAL OEM Options:

    Custom logos
    Packaging: Blister card, individual box, bult trays, poly bagged or special kits.